AppLayer.MantSvc/AppLayer_HypCutRevo — English @ Weblate: Shanghai BOCHU Electronic Technology Co., Ltd.

Translation

Context AppConfigStr.SOEMNameDefaultEn

Chinese (Simplified)

English

Needs editing

Only reviewers can change approved strings, please add a suggestion if you think the string should be changed.

Skip

Context	Chinese (Simplified)	English
AppConfigStr.SMagnetCut	FSCUT1000E-M激光切割系统	FSCUT1000E-M Laser Cutting Control System
AppConfigStr.SMaxVibrationAmplitude	随动抖动幅度过大,检查Z轴刚性或者减小跟随等级	Excessive follow vibration, check Z axis rigidity or lower follow level
AppConfigStr.SMemory	内存 (GB)	Memory (GB)
AppConfigStr.SMidCapInterference	中间处可能存在电容干扰, 检查10mm高度处电容干扰	There may be capacitive interference in the middle section; check for capacitive interference at a height of 10mm
AppConfigStr.SMoveDelay	系统延时过大, 检查驱动器参数	System latency is too large, please check the drive params
AppConfigStr.SMsgAutoAdjustFail	插补自动调整失败！	Interpolation automatic adjustment failed!
AppConfigStr.SMsgNotSupportResetByHyPanel	当前HyPanel不支持重启!	Current HyPanel does not support restart!
AppConfigStr.SMsgResetByHyPanel	当前HyPanel即将重启，预计10s内重启完毕。如果重启后仍然无法识别U盘或使用触摸屏，请联系设备制造商!	Current HyPanel will restart and complete within 10 seconds. If the USB drive is still not recognized or the touchscreen does not work after the restart, please contact the device manufacturer!
AppConfigStr.SMuchRetryTimes	由于您输入错误的次数太多，如需重试请关闭软件并重新启动！	Due to too many incorrect entries, please close the software and restart!
AppConfigStr.SNCSystem	数控系统	CNC System
AppConfigStr.SNoBCS100	没有使用BCS100，无法启用清洁喷嘴功能	Clean Nozzle function cannot be activated without BCS100
AppConfigStr.SNotApplicable	N/A	N/A
AppConfigStr.SNotError	正常	Normal
AppConfigStr.SNotNeedCaliResult	不需要获取的标定结果	Unnecessary Calibration Result
AppConfigStr.SOEMNameDefault	上海柏楚电子科技有限公司	Shanghai BOCHU Electronic Technology Co., Ltd
AppConfigStr.SOEMNameDefaultEn	Shanghai BOCHU Electronic Technology Co., Ltd.	Shanghai BOCHU Electronic Technology Co., Ltd.
AppConfigStr.SOperatingSystem	操作系统	Operating system
AppConfigStr.SPCIDriverLinkLost	PCI通讯失败，可能驱动错误，或控制卡松动	PCI communication failure, possibly due to driver error or loose control card
AppConfigStr.SRegCodeInvalidFmt	注册码格式不正确!	The registration code format is incorrect!
AppConfigStr.SRegisterOk	注册成功!	Registration successful!
AppConfigStr.SRestartApplication	请重新启动软件！	Please restart the software!
AppConfigStr.SReturnFixedPos	将定位到固定点:(X:%.2f, Y:%.2f)，请确保运动安全！	Moving to fixed point:(X:%.2f, Y:%.2f). Please ensure safety!
AppConfigStr.SReturnFixedPosOnlyXFmt	将定位到固定点:(X:%.2f)，请确保运动安全！	Moving to fixed point:(X:%.2f). Please ensure safety!
AppConfigStr.SStateNotAllowFollower	当前存在报警，禁止调高器执行该操作!	Alarm. Height controller cannot perform this operation!
AppConfigStr.SStaticTorque	静态力矩过大, 检查驱动器选型和驱动器参数	Static torque too large, check the servo selection and servo params
AppConfigStr.SStrokeMeasureHint	请行程测量后再进行尝试！	Please perform Range Measurement and try again!
AppConfigStr.SSystemTimeInvalid	系统时间不正确或者使用了已过期的注册码，请先校准系统时间！	Incorrect system time or license expired. Correct system time first!
AppConfigStr.STecSupportTel	技术支持电话	Technical Support
AppConfigStr.STimeIntervalTooLong	RTC与电脑时间相差大于半年，请检查电脑和RTC时间！	RTC time is 6 months different from computer time. Please check time settings!
AppConfigStr.SUnregistered	未注册	Unregistered
AppConfigStr.SVerifyCodeFailed	注册码认证失败, 错误代码：%x(%0:d)	Registration code verification failed. Error code:%x(%0:d)

Context	Chinese (Simplified)	English
AppConfigStr.SMagnetCut	FSCUT1000E-M激光切割系统	FSCUT1000E-M Laser Cutting Control System
AppConfigStr.SMaxVibrationAmplitude	随动抖动幅度过大,检查Z轴刚性或者减小跟随等级	Excessive follow vibration, check Z axis rigidity or lower follow level
AppConfigStr.SMemory	内存 (GB)	Memory (GB)
AppConfigStr.SMidCapInterference	中间处可能存在电容干扰, 检查10mm高度处电容干扰	There may be capacitive interference in the middle section; check for capacitive interference at a height of 10mm
AppConfigStr.SMoveDelay	系统延时过大, 检查驱动器参数	System latency is too large, please check the drive params
AppConfigStr.SMsgAutoAdjustFail	插补自动调整失败！	Interpolation automatic adjustment failed!
AppConfigStr.SMsgNotSupportResetByHyPanel	当前HyPanel不支持重启!	Current HyPanel does not support restart!
AppConfigStr.SMsgResetByHyPanel	当前HyPanel即将重启，预计10s内重启完毕。如果重启后仍然无法识别U盘或使用触摸屏，请联系设备制造商!	Current HyPanel will restart and complete within 10 seconds. If the USB drive is still not recognized or the touchscreen does not work after the restart, please contact the device manufacturer!
AppConfigStr.SMuchRetryTimes	由于您输入错误的次数太多，如需重试请关闭软件并重新启动！	Due to too many incorrect entries, please close the software and restart!
AppConfigStr.SNCSystem	数控系统	CNC System
AppConfigStr.SNoBCS100	没有使用BCS100，无法启用清洁喷嘴功能	Clean Nozzle function cannot be activated without BCS100
AppConfigStr.SNotApplicable	N/A	N/A
AppConfigStr.SNotError	正常	Normal
AppConfigStr.SNotNeedCaliResult	不需要获取的标定结果	Unnecessary Calibration Result
AppConfigStr.SOEMNameDefault	上海柏楚电子科技有限公司	Shanghai BOCHU Electronic Technology Co., Ltd
AppConfigStr.SOEMNameDefaultEn	Shanghai BOCHU Electronic Technology Co., Ltd.	Shanghai BOCHU Electronic Technology Co., Ltd.
AppConfigStr.SOperatingSystem	操作系统	Operating system
AppConfigStr.SPCIDriverLinkLost	PCI通讯失败，可能驱动错误，或控制卡松动	PCI communication failure, possibly due to driver error or loose control card
AppConfigStr.SRegCodeInvalidFmt	注册码格式不正确!	The registration code format is incorrect!
AppConfigStr.SRegisterOk	注册成功!	Registration successful!
AppConfigStr.SRestartApplication	请重新启动软件！	Please restart the software!
AppConfigStr.SReturnFixedPos	将定位到固定点:(X:%.2f, Y:%.2f)，请确保运动安全！	Moving to fixed point:(X:%.2f, Y:%.2f). Please ensure safety!
AppConfigStr.SReturnFixedPosOnlyXFmt	将定位到固定点:(X:%.2f)，请确保运动安全！	Moving to fixed point:(X:%.2f). Please ensure safety!
AppConfigStr.SStateNotAllowFollower	当前存在报警，禁止调高器执行该操作!	Alarm. Height controller cannot perform this operation!
AppConfigStr.SStaticTorque	静态力矩过大, 检查驱动器选型和驱动器参数	Static torque too large, check the servo selection and servo params
AppConfigStr.SStrokeMeasureHint	请行程测量后再进行尝试！	Please perform Range Measurement and try again!
AppConfigStr.SSystemTimeInvalid	系统时间不正确或者使用了已过期的注册码，请先校准系统时间！	Incorrect system time or license expired. Correct system time first!
AppConfigStr.STecSupportTel	技术支持电话	Technical Support
AppConfigStr.STimeIntervalTooLong	RTC与电脑时间相差大于半年，请检查电脑和RTC时间！	RTC time is 6 months different from computer time. Please check time settings!
AppConfigStr.SUnregistered	未注册	Unregistered

Loading…

None String updated in the repository AppLayer.MantSvc AppLayer_HypCutRevo English	Chinese (Simplified) Shanghai BOCHU Electronic Technology Co., Ltd. English 0 characters edited Current translation Approved Shanghai BOCHU Electronic Technology Co., Ltd. a month ago
fuyulu Bulk status changed AppLayer.MantSvc AppLayer_HypCutRevo English	Chinese (Simplified) Shanghai BOCHU Electronic Technology Co., Ltd. English 0 characters edited Current translation Translated Shanghai BOCHU Electronic Technology Co., Ltd. a month ago
fuyulu Translation uploaded AppLayer.MantSvc AppLayer_HypCutRevo English	Chinese (Simplified) Shanghai BOCHU Electronic Technology Co., Ltd. English 46 characters edited Current translation Translated Shanghai BOCHU Electronic Technology Co., Ltd. a month ago
None String added in the repository AppLayer.MantSvc AppLayer_HypCutRevo English	Chinese (Simplified) Shanghai BOCHU Electronic Technology Co., Ltd. English 0 characters edited Empty 2 months ago

Browse all string changes

Things to check

Unchanged translation

Source and translation are identical

Reset

Glossary

Chinese (Simplified)	English
No related strings found in the glossary.

String information

Context

AppConfigStr.SOEMNameDefaultEn

Flags

c-sharp-format, check-glossary, object-pascal-format, vue-format

String age

2 months ago

Last updated

a month ago

Source string age

2 months ago

Translation file

en.po, string 93