PlateHC/trunk — Chinese (Simplified) @ Weblate: 脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = …

Source string Source string

Context

Chinese (Simplified)

脉冲(CW)模式开启';     //10
  SIPGEmissionIsprepareing: string = '使能3秒准备中';  //15
  SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18
  SIPGFrontPanelLocked: string = '前显示面板锁定';     //20
  SIPGKeyTurnOnREM: string = '钥匙开关在REM位置';      //21
  SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22
  SIPGExtAimingControlStart: string = '外部红光控制开启'; //27
  SIPGSetLaserParams: string = '设置激光器参数

Needs editing

The string is read only.

Skip

	Context	Chinese (Simplified)	Actions
	CamStrs.SIPGDisablePulseMode	关闭脉冲模式
	CamStrs.SIPGEmissionIsprepareing	使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGEmissionStart	使能开启'; //2 SIPGExtControlModeStart: string = '外部控制模式开启';//4 SIPGGuideAimingStart: string = '引导红光开启'; //8 SIPGPulseModeStart: string = '脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGEnableEmissionControl	允许从控制接口控制光闸
	CamStrs.SIPGEnableExternalAimControl	开启外部红光控制
	CamStrs.SIPGEnableExternalControl	开启外部控制模式
	CamStrs.SIPGEnableGateMode	开启内部脉冲发生器(Gate)
	CamStrs.SIPGEnableModulation	开启调制模式
	CamStrs.SIPGEnablePulseMode	开启脉冲模式
	CamStrs.SIPGExtAimingControlStart	外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGExtControlModeStart	外部控制模式开启';//4 SIPGGuideAimingStart: string = '引导红光开启'; //8 SIPGPulseModeStart: string = '脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGExtEmissionControlStart	外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGFrontPanelLocked	前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGGuideAimingStart	引导红光开启'; //8 SIPGPulseModeStart: string = '脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGKeyTurnOnREM	钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGPulseModeStart	脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGPulseShapingMode	(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGSetLaserParams	设置激光器参数
	CamStrs.SIPGStartAimingBeam	开启红光
	CamStrs.SIPGStartEmission	开启光闸
	CamStrs.SIPGStopAimingBeam	关闭红光
	CamStrs.SIPGStopEmission	关闭光闸
	CamStrs.SImportAuto	一键导入
	CamStrs.SInnerTemp	内部实际温度
	CamStrs.SInvalidNozzlePosID	喷嘴工位不允许设置为0，请检查配置
	CamStrs.SLaserCurrent	当前激光二极管电流
	CamStrs.SLaserMode	激光形式
	CamStrs.SLaserMoitorErr	激光器监控页面异常:
	CamStrs.SLaserSN	产品序列号：
	CamStrs.SLaserVer	当前软件版本：
	CamStrs.SLaserWarning	打开激光器调试界面前请确保已正确连接！

	Context	Chinese (Simplified)	Actions
	CamStrs.SIPGDisablePulseMode	关闭脉冲模式
	CamStrs.SIPGEmissionIsprepareing	使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGEmissionStart	使能开启'; //2 SIPGExtControlModeStart: string = '外部控制模式开启';//4 SIPGGuideAimingStart: string = '引导红光开启'; //8 SIPGPulseModeStart: string = '脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGEnableEmissionControl	允许从控制接口控制光闸
	CamStrs.SIPGEnableExternalAimControl	开启外部红光控制
	CamStrs.SIPGEnableExternalControl	开启外部控制模式
	CamStrs.SIPGEnableGateMode	开启内部脉冲发生器(Gate)
	CamStrs.SIPGEnableModulation	开启调制模式
	CamStrs.SIPGEnablePulseMode	开启脉冲模式
	CamStrs.SIPGExtAimingControlStart	外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGExtControlModeStart	外部控制模式开启';//4 SIPGGuideAimingStart: string = '引导红光开启'; //8 SIPGPulseModeStart: string = '脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGExtEmissionControlStart	外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGFrontPanelLocked	前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGGuideAimingStart	引导红光开启'; //8 SIPGPulseModeStart: string = '脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGKeyTurnOnREM	钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGPulseModeStart	脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGPulseShapingMode	(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数
	CamStrs.SIPGSetLaserParams	设置激光器参数
	CamStrs.SIPGStartAimingBeam	开启红光
	CamStrs.SIPGStartEmission	开启光闸
	CamStrs.SIPGStopAimingBeam	关闭红光
	CamStrs.SIPGStopEmission	关闭光闸
	CamStrs.SImportAuto	一键导入
	CamStrs.SInnerTemp	内部实际温度
	CamStrs.SInvalidNozzlePosID	喷嘴工位不允许设置为0，请检查配置
	CamStrs.SLaserCurrent	当前激光二极管电流
	CamStrs.SLaserMode	激光形式
	CamStrs.SLaserMoitorErr	激光器监控页面异常:
	CamStrs.SLaserSN	产品序列号：
	CamStrs.SLaserVer	当前软件版本：

Loading…

None

String updated in the repository

Chinese (Simplified)

脉冲(CW)模式开启'; //10
SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15
SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18
SIPGFrontPanelLocked: string = '前显示面板锁定'; //20
SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21
SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22
SIPGExtAimingControlStart: string = '外部红光控制开启'; //27
SIPGSetLaserParams: string = '设置激光器参数

Chinese (Simplified) 376 characters edited Current translation Read only

3 months ago

None

String added in the repository

Chinese (Simplified)

Chinese (Simplified) 10 characters edited Read only

4 months ago

Browse all string changes

Things to check

Inconsistent

This string has more than one translation in this project or is untranslated in some components.

Reset

Multiple failing checks

Following checks are failing:
Does not follow glossary: English, English, Spanish, Spanish, Spanish, Spanish, Italian, Italian, Italian, Japanese, Japanese, Japanese, Korean, Korean, Korean, Korean, Korean, Portuguese, Portuguese, Portuguese, Portuguese, Thai, Thai, Thai, Thai, Vietnamese, Vietnamese, Vietnamese, Vietnamese, Polish, Polish

Reset

Glossary

Chinese (Simplified)	Chinese (Simplified)
No related strings found in the glossary.

String information

Context

CamStrs.SIPGPulseModeStart

Flags

c-sharp-format, check-glossary, object-pascal-format, read-only, vue-format

String age

4 months ago

Last updated

3 months ago

Source string age

4 months ago

Translation file

zh_Hans.po, string 103