PlateHC/trunk — English @ Weblate: 脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = …

Translation

Context CamStrs.SIPGPulseModeStart

Chinese (Simplified)

脉冲(CW)模式开启'; //10
SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15
SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18
SIPGFrontPanelLocked: string = '前显示面板锁定'; //20
SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21
SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22
SIPGExtAimingControlStart: string = '外部红光控制开启'; //27
SIPGSetLaserParams: string = '设置激光器参数

English

Needs editing

Skip

Context	Chinese (Simplified)	English
CamStrs.SIPGDisablePulseMode	关闭脉冲模式	Disable pulse mode
CamStrs.SIPGEmissionIsprepareing	使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	SIPGSetLaserParams: string = 'Set laser parameters';
CamStrs.SIPGEmissionStart	使能开启'; //2 SIPGExtControlModeStart: string = '外部控制模式开启';//4 SIPGGuideAimingStart: string = '引导红光开启'; //8 SIPGPulseModeStart: string = '脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	Enable Start; //2 External Control Mode Start; //4 Guide Red Light Start; //8 Pulse (CW) Mode Start; //10 Enabling 3 Seconds Preparation; //15 External Enable Control Start; //18 Front Panel Locked; //20 Key Switch in REM Position; //21 (Optional) Pulse Shaping Mode Start; //22 External Red Light Control Start; //27 Set Laser Parameters;
CamStrs.SIPGEnableEmissionControl	允许从控制接口控制光闸	Enable Emission Control
CamStrs.SIPGEnableExternalAimControl	开启外部红光控制	Enable external red light control
CamStrs.SIPGEnableExternalControl	开启外部控制模式	Enable external control mode
CamStrs.SIPGEnableGateMode	开启内部脉冲发生器(Gate)	Enable GateMode
CamStrs.SIPGEnableModulation	开启调制模式	Enable modulation mode
CamStrs.SIPGEnablePulseMode	开启脉冲模式	Enable pulse mode
CamStrs.SIPGExtAimingControlStart	外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	Set Laser Parameters
CamStrs.SIPGExtControlModeStart	外部控制模式开启';//4 SIPGGuideAimingStart: string = '引导红光开启'; //8 SIPGPulseModeStart: string = '脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	Set Laser Parameters
CamStrs.SIPGExtEmissionControlStart	外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	Set Laser Parameters
CamStrs.SIPGFrontPanelLocked	前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	SIPGSetLaserParams: string = 'Set laser parameters';
CamStrs.SIPGGuideAimingStart	引导红光开启'; //8 SIPGPulseModeStart: string = '脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	SIPGSetLaserParams: string = 'Set laser parameters';
CamStrs.SIPGKeyTurnOnREM	钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	1. Key switch in REM position; 2. SIPGPulseShapingMode: (Optional) Waveform pulse mode enabled; 3. SIPGExtAimingControlStart: External red light control enabled; 4. SIPGSetLaserParams: Set laser parameters;
CamStrs.SIPGPulseModeStart	脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	1. Pulsed (CW) mode enabled 2. Enabling 3 seconds preparing 3. External enable control started 4. Front panel locked 5. Key switch in REM position 6. (Optional) Waveform pulsed mode enabled 7. External red light control started 8. Set laser parameters
CamStrs.SIPGPulseShapingMode	(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	- (Optional) Enable waveform pulse mode - Enable external red light control - Set laser parameters
CamStrs.SIPGSetLaserParams	设置激光器参数	Set LaserParams
CamStrs.SIPGStartAimingBeam	开启红光	Start aiming beam
CamStrs.SIPGStartEmission	开启光闸	Start shutter
CamStrs.SIPGStopAimingBeam	关闭红光	Aiming off
CamStrs.SIPGStopEmission	关闭光闸	Shutter off
CamStrs.SImportAuto	一键导入	Quick Import
CamStrs.SInnerTemp	内部实际温度	Actual inner temperature
CamStrs.SInvalidNozzlePosID	喷嘴工位不允许设置为0，请检查配置	Nozzle station cannot be 0. Please check the configuration
CamStrs.SLaserCurrent	当前激光二极管电流	Current laser diode current
CamStrs.SLaserMode	激光形式	Laser Form
CamStrs.SLaserMoitorErr	激光器监控页面异常:	Laser monitor page error:
CamStrs.SLaserSN	产品序列号：	Product SN:
CamStrs.SLaserVer	当前软件版本：	Software version:
CamStrs.SLaserWarning	打开激光器调试界面前请确保已正确连接！	Ensure that laser is connected correctly before opening its debugging interface!

Context	Chinese (Simplified)	English
CamStrs.SIPGDisablePulseMode	关闭脉冲模式	Disable pulse mode
CamStrs.SIPGEmissionIsprepareing	使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	SIPGSetLaserParams: string = 'Set laser parameters';
CamStrs.SIPGEmissionStart	使能开启'; //2 SIPGExtControlModeStart: string = '外部控制模式开启';//4 SIPGGuideAimingStart: string = '引导红光开启'; //8 SIPGPulseModeStart: string = '脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	Enable Start; //2 External Control Mode Start; //4 Guide Red Light Start; //8 Pulse (CW) Mode Start; //10 Enabling 3 Seconds Preparation; //15 External Enable Control Start; //18 Front Panel Locked; //20 Key Switch in REM Position; //21 (Optional) Pulse Shaping Mode Start; //22 External Red Light Control Start; //27 Set Laser Parameters;
CamStrs.SIPGEnableEmissionControl	允许从控制接口控制光闸	Enable Emission Control
CamStrs.SIPGEnableExternalAimControl	开启外部红光控制	Enable external red light control
CamStrs.SIPGEnableExternalControl	开启外部控制模式	Enable external control mode
CamStrs.SIPGEnableGateMode	开启内部脉冲发生器(Gate)	Enable GateMode
CamStrs.SIPGEnableModulation	开启调制模式	Enable modulation mode
CamStrs.SIPGEnablePulseMode	开启脉冲模式	Enable pulse mode
CamStrs.SIPGExtAimingControlStart	外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	Set Laser Parameters
CamStrs.SIPGExtControlModeStart	外部控制模式开启';//4 SIPGGuideAimingStart: string = '引导红光开启'; //8 SIPGPulseModeStart: string = '脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	Set Laser Parameters
CamStrs.SIPGExtEmissionControlStart	外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	Set Laser Parameters
CamStrs.SIPGFrontPanelLocked	前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	SIPGSetLaserParams: string = 'Set laser parameters';
CamStrs.SIPGGuideAimingStart	引导红光开启'; //8 SIPGPulseModeStart: string = '脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	SIPGSetLaserParams: string = 'Set laser parameters';
CamStrs.SIPGKeyTurnOnREM	钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	1. Key switch in REM position; 2. SIPGPulseShapingMode: (Optional) Waveform pulse mode enabled; 3. SIPGExtAimingControlStart: External red light control enabled; 4. SIPGSetLaserParams: Set laser parameters;
CamStrs.SIPGPulseModeStart	脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	1. Pulsed (CW) mode enabled 2. Enabling 3 seconds preparing 3. External enable control started 4. Front panel locked 5. Key switch in REM position 6. (Optional) Waveform pulsed mode enabled 7. External red light control started 8. Set laser parameters
CamStrs.SIPGPulseShapingMode	(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数	- (Optional) Enable waveform pulse mode - Enable external red light control - Set laser parameters
CamStrs.SIPGSetLaserParams	设置激光器参数	Set LaserParams
CamStrs.SIPGStartAimingBeam	开启红光	Start aiming beam
CamStrs.SIPGStartEmission	开启光闸	Start shutter
CamStrs.SIPGStopAimingBeam	关闭红光	Aiming off
CamStrs.SIPGStopEmission	关闭光闸	Shutter off
CamStrs.SImportAuto	一键导入	Quick Import
CamStrs.SInnerTemp	内部实际温度	Actual inner temperature
CamStrs.SInvalidNozzlePosID	喷嘴工位不允许设置为0，请检查配置	Nozzle station cannot be 0. Please check the configuration
CamStrs.SLaserCurrent	当前激光二极管电流	Current laser diode current
CamStrs.SLaserMode	激光形式	Laser Form
CamStrs.SLaserMoitorErr	激光器监控页面异常:	Laser monitor page error:
CamStrs.SLaserSN	产品序列号：	Product SN:
CamStrs.SLaserVer	当前软件版本：	Software version:

Loading…

None String updated in the repository PlateHC trunk English	Chinese (Simplified) 脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数 English 0 characters edited Current translation Translated 1. Pulsed (CW) mode enabled 2. Enabling 3 seconds preparing 3. External enable control started 4. Front panel locked 5. Key switch in REM position 6. (Optional) Waveform pulsed mode enabled 7. External red light control started 8. Set laser parameters 3 months ago
fuyulu Translation changed PlateHC trunk English	Chinese (Simplified) 脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数 English 0 characters edited Current translation Translated 1. Pulsed (CW) mode enabled 2. Enabling 3 seconds preparing 3. External enable control started 4. Front panel locked 5. Key switch in REM position 6. (Optional) Waveform pulsed mode enabled 7. External red light control started 8. Set laser parameters 3 months ago
mt:bochutranslate Automatically translated PlateHC trunk English	Chinese (Simplified) 脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数 English 235 characters edited Current translation Needs editing ~~CW P~~1. Pulsed (CW) mode enabled 2. Enabling 3 seconds preparing 3. External enable control started 4. Front panel locked 5. Key switch in REM position 6. (Optional) Waveform pulseMd mode ~~Start~~enabled 7. External red light control started 8. Set laser parameters 3 months ago
None String updated in the repository PlateHC trunk English	Chinese (Simplified) 脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数 English 0 characters edited Needs editing CW PulseMode Start 3 months ago
None Source string changed PlateHC trunk English	Chinese (Simplified) 376 characters edited Needs editing 脉冲(CW)模式开启'; //10 SIPGEmissionIsprepareing: string = '使能3秒准备中'; //15 SIPGExtEmissionControlStart: string = '外部使能控制开启'; //18 SIPGFrontPanelLocked: string = '前显示面板锁定'; //20 SIPGKeyTurnOnREM: string = '钥匙开关在REM位置'; //21 SIPGPulseShapingMode: string = '(选配)波形脉冲模式开启';//22 SIPGExtAimingControlStart: string = '外部红光控制开启'; //27 SIPGSetLaserParams: string = '设置激光器参数 3 months ago
None String added in the repository PlateHC trunk English	Chinese (Simplified) 脉冲(CW)模式开启 English 18 characters edited Translated CW PulseMode Start 4 months ago

Browse all string changes

Things to check

Does not follow glossary

Following terms are not translated according to glossary: 中, 显示, 红光, 设置, 锁定

Reset

Inconsistent

This string has more than one translation in this project or is untranslated in some components.

Reset

Glossary

Chinese (Simplified)	English
中	Medium	*HypCut Revo软件术语库
显示	Display	*HypCut软件术语库
显示	Display	*HypCut Revo软件术语库
激光	Laser	*HypCut Revo软件术语库
控制按钮，激光’发射/出光’ Laser Emission, 描述激光‘发射’‘点射’的动词shot，burst
激光器	Laser	*HypCut软件术语库
激光器	Laser	*HypCut Revo软件术语库
红光	Aiming	*HypCut软件术语库
【红光】按钮,Key: SSPAiming
红光	Aiming	*HypCut Revo软件术语库
设置	Settings	*HypCut软件术语库
锁定	Lock	*HypCut Revo软件术语库

String information

Context

CamStrs.SIPGPulseModeStart

Flags

c-sharp-format, check-glossary, object-pascal-format, vue-format

String age

4 months ago

Last updated

3 months ago

Source string age

4 months ago

Translation file

en.po, string 103