NcLayer.MultiTask/MVCRFramework_Release — English @ Weblate: 请输入文件名

Translation

Context MultiTask.SInputFileName

Chinese (Simplified)

English

Needs editing

Skip

Context	Chinese (Simplified)	English
MultiTask.SIOFileMode	IO切换	IO Switch
MultiTask.SIOTaskFeedBackInport	准备就绪输入口	Input ready
MultiTask.SIOTaskFrm	IO任务加工	IO task
MultiTask.SIOTaskFrmDescHint	使用IO口控制工位自动执行加工	Use IO for station control and auto production
MultiTask.SIOTaskFrmTitle	参数设定	Parameter setting
MultiTask.SIOTaskOutput	加工完毕输出口	Production complete output
MultiTask.SIOTaskWorkFinished	加工完成	Finished
MultiTask.SImportFile	添加任务	Add Task
MultiTask.SInMultFiles	多文件输入	MultiFile Production
MultiTask.SIncludeTech	计算图形工艺	Include graphic technique
MultiTask.SInitPos	初始位置	Initial pos
MultiTask.SInportCode	输入口二进制编码	Input binary code
MultiTask.SInput	输入	Input
MultiTask.SInputBitSetError	存在无效编码, 请选择有效编码后再保存	There is invalid encoding. Please select a valid encoding, then save!
MultiTask.SInputCloseLogic	常闭	NC
MultiTask.SInputFileName	请输入文件名	Please enter the file name.
MultiTask.SInputOpenLogic	常开	NO
MultiTask.SInvalidReadyInputAlarmDesc	当前工位对应的就绪输入口信号无效，不能执行加工指令	The signal of the ready input port corresponding to the current station is invalid, and the machining instruction cannot be executed.
MultiTask.SLeft	左	Left
MultiTask.SLeftDown	左下	Bottom-Left
MultiTask.SLeftUp	左上	Top Left
MultiTask.SListFileWorkMode	列表加工	List Order Production
MultiTask.SListModeHint	列表模式下需要搭配文件自动切换	In list order production, you need to choose auto switch.
MultiTask.SLoopPause	循环暂停	Paused
MultiTask.SLoopWorkSetting	循环拷机设置	Run Test Settings
MultiTask.SMaterial	材质	Material
MultiTask.SMid	中	Middle
MultiTask.SModeChangeFailHint	单台单板模式下，不启用自动交换台只能使用单次加工	1 Station - 1 Plate mode, can only use Single Time Production without Auto Change Pallet
MultiTask.SMoveBottom	置底	Bottom
MultiTask.SMoveDown	下移	Move Down
MultiTask.SMoveTop	置顶	Top

Context	Chinese (Simplified)	English
MultiTask.SIOFileMode	IO切换	IO Switch
MultiTask.SIOTaskFeedBackInport	准备就绪输入口	Input ready
MultiTask.SIOTaskFrm	IO任务加工	IO task
MultiTask.SIOTaskFrmDescHint	使用IO口控制工位自动执行加工	Use IO for station control and auto production
MultiTask.SIOTaskFrmTitle	参数设定	Parameter setting
MultiTask.SIOTaskOutput	加工完毕输出口	Production complete output
MultiTask.SIOTaskWorkFinished	加工完成	Finished
MultiTask.SImportFile	添加任务	Add Task
MultiTask.SInMultFiles	多文件输入	MultiFile Production
MultiTask.SIncludeTech	计算图形工艺	Include graphic technique
MultiTask.SInitPos	初始位置	Initial pos
MultiTask.SInportCode	输入口二进制编码	Input binary code
MultiTask.SInput	输入	Input
MultiTask.SInputBitSetError	存在无效编码, 请选择有效编码后再保存	There is invalid encoding. Please select a valid encoding, then save!
MultiTask.SInputCloseLogic	常闭	NC
MultiTask.SInputFileName	请输入文件名	Please enter the file name.
MultiTask.SInputOpenLogic	常开	NO
MultiTask.SInvalidReadyInputAlarmDesc	当前工位对应的就绪输入口信号无效，不能执行加工指令	The signal of the ready input port corresponding to the current station is invalid, and the machining instruction cannot be executed.
MultiTask.SLeft	左	Left
MultiTask.SLeftDown	左下	Bottom-Left
MultiTask.SLeftUp	左上	Top Left
MultiTask.SListFileWorkMode	列表加工	List Order Production
MultiTask.SListModeHint	列表模式下需要搭配文件自动切换	In list order production, you need to choose auto switch.
MultiTask.SLoopPause	循环暂停	Paused
MultiTask.SLoopWorkSetting	循环拷机设置	Run Test Settings
MultiTask.SMaterial	材质	Material
MultiTask.SMid	中	Middle
MultiTask.SModeChangeFailHint	单台单板模式下，不启用自动交换台只能使用单次加工	1 Station - 1 Plate mode, can only use Single Time Production without Auto Change Pallet
MultiTask.SMoveBottom	置底	Bottom
MultiTask.SMoveDown	下移	Move Down

Loading…

mt:weblate

Automatically translated

Chinese (Simplified)

English 27 characters edited Current translation Translated

3 weeks ago

None

String added in the repository

Chinese (Simplified)

English 0 characters edited Empty

2 months ago

Browse all string changes

Things to check

Mismatched full stop

Source and translation do not both end with a full stop

Reset

Glossary

Chinese (Simplified)	English
文件名	File Name	*HypCut软件术语库
文件名	File Name	*HypCut Revo软件术语库
文件	File	FACut软件术语表

String information

Context

MultiTask.SInputFileName

Labels

Automatically translated

String age

2 months ago

Last updated

3 weeks ago

Source string age

2 months ago

Translation file

en.po, string 70