RobotNc.RobotModel/trunk — English @ Weblate: 2. 检查外部轴正方向配置是否正确；

Translation

Context RobotModel_Strs.SCheckAxisDirection

Chinese (Simplified)

English

Needs editing

Skip

Context	Chinese (Simplified)	English
RobotModel_Strs.S6KSolver	使用普通6轴求解器	Using standard 6-axis solver
RobotModel_Strs.SAimAtMarkPt	1. 请认准对准 Mark 点；	1. Please align with the Mark point.
RobotModel_Strs.SAllParamSolver	使用全参数求解器	Using full parameter solver
RobotModel_Strs.SArray2TMatrixDimensionError	数组转换齐次变换矩阵：数组长度不为12	Array to homogeneous transformation matrix conversion: Array length is not 12
RobotModel_Strs.SAssemblyMatrixNotOrthogonal	装配矩阵不正交	Assembly matrix is not orthogonal.
RobotModel_Strs.SAssemblyMatrixSolvingError	装配矩阵计算错误！	Assembly matrix calculation error!
RobotModel_Strs.SBigAngleBetweenGantryAndRobotBasePlane	地轨与机器人基座平面夹角过大	Excessive angle between the linear track and the robot base plane.
RobotModel_Strs.SBigOrigin	J%d 零点标定结果较大【当前：%.3f°，阈值：±%g°】，存在风险。	J%d zero calibration result is large [current: %.3f°, threshold: ±%g°]. There is a risk.
RobotModel_Strs.SBigSpeedRatio	%s 方向减速比标定结果较大【当前：%.3f，阈值：%g-%g】，存在风险。	The gear ratio in the %s direction is greater than the calibration result [current: %.3f, threshold: %g-%g]. There is a risk.
RobotModel_Strs.SCalcFailure	计算失败	Calculation failed
RobotModel_Strs.SCalcTorqueErrorFailed	计算力矩误差失败	Failed to calculate torque error
RobotModel_Strs.SCalcTorqueErrorSucceeded	计算力矩误差成功	Torque error calculation succeeded
RobotModel_Strs.SCalibratedAssemblyMatrixAbnormal	装配矩阵 %s 方向标定结果变换较大【当前：%.3f°，阈值：±%g°】，存在风险。	Significant variation observed in the calibration results for assembly matrix in the %s direction [current: %.3f°, threshold: ±%g°]. There is a risk.
RobotModel_Strs.SCalibratedTcpAbnormal	TCP 标定结果变换较大【当前：%.3fmm，阈值：±%gmm】，存在风险。	Significant variation observed in TCP calibration results [current: %.3fmm, threshold: ±%gmm]. There is a risk.
RobotModel_Strs.SCheckAxisDirection	2. 检查外部轴正方向配置是否正确；	2.Check that the external axis is correctly configured in the positive direction;
RobotModel_Strs.SCheckRobotAccuracy	3. 检查机械臂本体精度。	3. Check the accuracy of the robotic arm body.
RobotModel_Strs.SCompensationDenied_NotOrthogonal	装配矩阵不正交，禁止补偿。请联系售后人员。	The assembly matrix is non-orthogonal, compensation is prohibited. Please contact the customer service.
RobotModel_Strs.SCompensationDenied_NotRightHand	装配矩阵非右手系，禁止补偿。	The assembly matrix is not in the right-hand system, compensation is prohibited.
RobotModel_Strs.SCopy6KSolverFailure	复制6轴求解器失败	Failed to copy 6-axis solver
RobotModel_Strs.SDLLFunctionMissing	dll中函数未找到	Function not found in DLL
RobotModel_Strs.SDataNotEnough	数据量至少为 2.	The data volume should be at least 2.
RobotModel_Strs.SDestroy6KSolverFailure	析构6轴求解器失败	Failed to destruct 6-axis solver
RobotModel_Strs.SFivePointAtLeastForTcpCalibration	计算 TCP 位姿，至少需要 5 个点	Calculating the TCP pose requires at least 5 points
RobotModel_Strs.SFsRobotDll2NotFound	缺少fsRobotDll2	fsRobotDll2 is missing
RobotModel_Strs.SHandEyeHighDirChangeLarge	高视距手眼矩阵 %s 方向标定结果变换较大【当前：%.3f°，阈值：±%g°】，存在风险。	Calibration result of high visibility eye-hand matrix in %s direction has a significant variation [Current: %.3f°, Threshold: ±%g°], which poses a risk.
RobotModel_Strs.SHandEyeHighNotRightHanded	高视距手眼矩阵非右手系，禁止补偿。	Eye-hand matrix of high visibility is non-right-handed system. Compensation is prohibited.
RobotModel_Strs.SHandEyeHighPosChangeLarge	高视距手眼矩阵位移变换较大【当前：%.3fmm，阈值：±%gmm】，存在风险。	High visibility eye-hand matrix displacement transformation has a significant variation [Current: %.3fmm, Threshold: ±%gmm], which poses a risk.
RobotModel_Strs.SHandEyeLineDirChangeLarge	线扫相机手眼矩阵 %s 方向标定结果变换较大【当前：%.3f°，阈值：±%g°】，存在风险。	The hand-eye matrix of the line scan camera %s shows significant changes in the directional calibration results [Current: %.3f°, Threshold: ±%g°], indicating a risk.
RobotModel_Strs.SHandEyeLineNotRightHanded	线扫相机手眼矩阵非右手系，禁止补偿。	The line scan camera's hand-eye matrix is not in a right-handed coordinate system. Compensation is prohibited.
RobotModel_Strs.SHandEyeLinePosChangeLarge	线扫相机手眼矩阵位移变换较大【当前：%.3fmm，阈值：±%gmm】，存在风险。	The displacement transformation of the line scan camera's hand-eye matrix shows significant changes [Current: %.3fmm, Threshold: ±%gmm], indicating a risk.

Context	Chinese (Simplified)	English
RobotModel_Strs.S6KSolver	使用普通6轴求解器	Using standard 6-axis solver
RobotModel_Strs.SAimAtMarkPt	1. 请认准对准 Mark 点；	1. Please align with the Mark point.
RobotModel_Strs.SAllParamSolver	使用全参数求解器	Using full parameter solver
RobotModel_Strs.SArray2TMatrixDimensionError	数组转换齐次变换矩阵：数组长度不为12	Array to homogeneous transformation matrix conversion: Array length is not 12
RobotModel_Strs.SAssemblyMatrixNotOrthogonal	装配矩阵不正交	Assembly matrix is not orthogonal.
RobotModel_Strs.SAssemblyMatrixSolvingError	装配矩阵计算错误！	Assembly matrix calculation error!
RobotModel_Strs.SBigAngleBetweenGantryAndRobotBasePlane	地轨与机器人基座平面夹角过大	Excessive angle between the linear track and the robot base plane.
RobotModel_Strs.SBigOrigin	J%d 零点标定结果较大【当前：%.3f°，阈值：±%g°】，存在风险。	J%d zero calibration result is large [current: %.3f°, threshold: ±%g°]. There is a risk.
RobotModel_Strs.SBigSpeedRatio	%s 方向减速比标定结果较大【当前：%.3f，阈值：%g-%g】，存在风险。	The gear ratio in the %s direction is greater than the calibration result [current: %.3f, threshold: %g-%g]. There is a risk.
RobotModel_Strs.SCalcFailure	计算失败	Calculation failed
RobotModel_Strs.SCalcTorqueErrorFailed	计算力矩误差失败	Failed to calculate torque error
RobotModel_Strs.SCalcTorqueErrorSucceeded	计算力矩误差成功	Torque error calculation succeeded
RobotModel_Strs.SCalibratedAssemblyMatrixAbnormal	装配矩阵 %s 方向标定结果变换较大【当前：%.3f°，阈值：±%g°】，存在风险。	Significant variation observed in the calibration results for assembly matrix in the %s direction [current: %.3f°, threshold: ±%g°]. There is a risk.
RobotModel_Strs.SCalibratedTcpAbnormal	TCP 标定结果变换较大【当前：%.3fmm，阈值：±%gmm】，存在风险。	Significant variation observed in TCP calibration results [current: %.3fmm, threshold: ±%gmm]. There is a risk.
RobotModel_Strs.SCheckAxisDirection	2. 检查外部轴正方向配置是否正确；	2.Check that the external axis is correctly configured in the positive direction;
RobotModel_Strs.SCheckRobotAccuracy	3. 检查机械臂本体精度。	3. Check the accuracy of the robotic arm body.
RobotModel_Strs.SCompensationDenied_NotOrthogonal	装配矩阵不正交，禁止补偿。请联系售后人员。	The assembly matrix is non-orthogonal, compensation is prohibited. Please contact the customer service.
RobotModel_Strs.SCompensationDenied_NotRightHand	装配矩阵非右手系，禁止补偿。	The assembly matrix is not in the right-hand system, compensation is prohibited.
RobotModel_Strs.SCopy6KSolverFailure	复制6轴求解器失败	Failed to copy 6-axis solver
RobotModel_Strs.SDLLFunctionMissing	dll中函数未找到	Function not found in DLL
RobotModel_Strs.SDataNotEnough	数据量至少为 2.	The data volume should be at least 2.
RobotModel_Strs.SDestroy6KSolverFailure	析构6轴求解器失败	Failed to destruct 6-axis solver
RobotModel_Strs.SFivePointAtLeastForTcpCalibration	计算 TCP 位姿，至少需要 5 个点	Calculating the TCP pose requires at least 5 points
RobotModel_Strs.SFsRobotDll2NotFound	缺少fsRobotDll2	fsRobotDll2 is missing
RobotModel_Strs.SHandEyeHighDirChangeLarge	高视距手眼矩阵 %s 方向标定结果变换较大【当前：%.3f°，阈值：±%g°】，存在风险。	Calibration result of high visibility eye-hand matrix in %s direction has a significant variation [Current: %.3f°, Threshold: ±%g°], which poses a risk.
RobotModel_Strs.SHandEyeHighNotRightHanded	高视距手眼矩阵非右手系，禁止补偿。	Eye-hand matrix of high visibility is non-right-handed system. Compensation is prohibited.
RobotModel_Strs.SHandEyeHighPosChangeLarge	高视距手眼矩阵位移变换较大【当前：%.3fmm，阈值：±%gmm】，存在风险。	High visibility eye-hand matrix displacement transformation has a significant variation [Current: %.3fmm, Threshold: ±%gmm], which poses a risk.
RobotModel_Strs.SHandEyeLineDirChangeLarge	线扫相机手眼矩阵 %s 方向标定结果变换较大【当前：%.3f°，阈值：±%g°】，存在风险。	The hand-eye matrix of the line scan camera %s shows significant changes in the directional calibration results [Current: %.3f°, Threshold: ±%g°], indicating a risk.
RobotModel_Strs.SHandEyeLineNotRightHanded	线扫相机手眼矩阵非右手系，禁止补偿。	The line scan camera's hand-eye matrix is not in a right-handed coordinate system. Compensation is prohibited.

Loading…

huanglinxiao

Translation uploaded

Chinese (Simplified)

English 81 characters edited Current translation Translated

11 days ago

None

String added in the repository

Chinese (Simplified)

English 0 characters edited Empty

4 months ago

Browse all string changes

Things to check

Mismatched semicolon

Source and translation do not both end with a semicolon

Reset

Glossary

Chinese (Simplified)	English
No related strings found in the glossary.

String information

Context

RobotModel_Strs.SCheckAxisDirection

String age

4 months ago

Last updated

11 days ago

Source string age

4 months ago

Translation file

en.po, string 15