PlateHC/PlateHC/trunk-Maintenance — English @ Weblate: 机床即将开始运动，确定之后开始运动。

Translation

Context CamStrs.SMoveToPosStartConfirm

Chinese (Simplified)

English

Needs editing

Skip

Context	Chinese (Simplified)	English
CamStrs.SMeasureInertia	惯量测定	Inertia Measurement
CamStrs.SMeasureInertiaHint	计算各个轴的惯量	Calculate the inertia of each axis
CamStrs.SMechShutter	机械光闸	Mech Shutter
CamStrs.SMechShutterOk	机械光闸应答	Mech Shutter OK
CamStrs.SMonitorAxis	监控轴	Monitor axis
CamStrs.SMotorCorrelation	电机相关	Motor Switch
CamStrs.SMotorPitchWithUnit	节距：%.2f mm	Pitch: %.2f mm
CamStrs.SMotorSkidAlarmThreshold	打滑检测报警阈值	Slip Alarm Threshold
CamStrs.SMotorSkidDetect	机床打滑检测	Machinery Slip Detection
CamStrs.SMotorSkidHint	用于回原点打滑检测初始化和检测机床是否打滑	It is for homing slip detection initialization and checking if the machine tool is slipping
CamStrs.SMotorSkidHint2	2、请确认限位开关工作正常	2. Confirm limit switch is functioning properly
CamStrs.SMoudleErrorCode	模块错误代码	Module error code
CamStrs.SMoveSpeed	运动速度	Speed
CamStrs.SMoveToLoadPosition	移动到安装位置	Locate to load position
CamStrs.SMoveToLocation	已经运动到指定位置	Reached target position
CamStrs.SMoveToPosStartConfirm	机床即将开始运动，确定之后开始运动。	The machine is about to move. Confirm?
CamStrs.SMoveToUnloadPosition	移动到拆卸位置	Locate to uninstallation position
CamStrs.SMsgAutoCaliFailed	标定板距离原点过近，距离过短，无法标定！	The calibration plate is too close to the Origin. Unable to calibrate!
CamStrs.SMsgCapCaliFinish	标定结束：本体电容值：%d，当前电容值： %d	Calibration completed: local capacitance: %d, current capacitance: %d
CamStrs.SMsgStrokeMeasureAction	请先回原点，再做行程测量。	Please perform Return Origin, then start range measurement.
CamStrs.SMsgWannaSaveOptimizedParams	提示：写入参数后机床将运动并自动检测，是否继续？	After writing parameters, the machine will start moving and measuring. Continue?
CamStrs.SNA	无	Null
CamStrs.SNegLimitState	负限位开关状态	Negative limit switch
CamStrs.SNegSoftLimitState	负软限位状态	Negative soft limit
CamStrs.SNextStep	下一步	Next
CamStrs.SNoBCS100	没有使用BCS100，无法启用清洁喷嘴功能	BCS100 is required in AutoCleanHead function but not found.
CamStrs.SNoExtendAxis	未检测到扩展轴[%d], 无法进行更换喷嘴	Axis [%d] not detected. Unable to replace nozzle
CamStrs.SNoFoundCleanPos	无法获取当前到位工作台的清洁位置!	Cannot access cleaning position for current table!
CamStrs.SNoUse	不使用	Not use
CamStrs.SNotMoveToLocation	没有运动到指定位置	Not in the target position
CamStrs.SNotReturnOrgYet	检测到系统异常，请执行回原点操作	System anomaly detected, please perform Return Origin operation

Context	Chinese (Simplified)	English
CamStrs.SMeasureInertia	惯量测定	Inertia Measurement
CamStrs.SMeasureInertiaHint	计算各个轴的惯量	Calculate the inertia of each axis
CamStrs.SMechShutter	机械光闸	Mech Shutter
CamStrs.SMechShutterOk	机械光闸应答	Mech Shutter OK
CamStrs.SMonitorAxis	监控轴	Monitor axis
CamStrs.SMotorCorrelation	电机相关	Motor Switch
CamStrs.SMotorPitchWithUnit	节距：%.2f mm	Pitch: %.2f mm
CamStrs.SMotorSkidAlarmThreshold	打滑检测报警阈值	Slip Alarm Threshold
CamStrs.SMotorSkidDetect	机床打滑检测	Machinery Slip Detection
CamStrs.SMotorSkidHint	用于回原点打滑检测初始化和检测机床是否打滑	It is for homing slip detection initialization and checking if the machine tool is slipping
CamStrs.SMotorSkidHint2	2、请确认限位开关工作正常	2. Confirm limit switch is functioning properly
CamStrs.SMoudleErrorCode	模块错误代码	Module error code
CamStrs.SMoveSpeed	运动速度	Speed
CamStrs.SMoveToLoadPosition	移动到安装位置	Locate to load position
CamStrs.SMoveToLocation	已经运动到指定位置	Reached target position
CamStrs.SMoveToPosStartConfirm	机床即将开始运动，确定之后开始运动。	The machine is about to move. Confirm?
CamStrs.SMoveToUnloadPosition	移动到拆卸位置	Locate to uninstallation position
CamStrs.SMsgAutoCaliFailed	标定板距离原点过近，距离过短，无法标定！	The calibration plate is too close to the Origin. Unable to calibrate!
CamStrs.SMsgCapCaliFinish	标定结束：本体电容值：%d，当前电容值： %d	Calibration completed: local capacitance: %d, current capacitance: %d
CamStrs.SMsgStrokeMeasureAction	请先回原点，再做行程测量。	Please perform Return Origin, then start range measurement.
CamStrs.SMsgWannaSaveOptimizedParams	提示：写入参数后机床将运动并自动检测，是否继续？	After writing parameters, the machine will start moving and measuring. Continue?
CamStrs.SNA	无	Null
CamStrs.SNegLimitState	负限位开关状态	Negative limit switch
CamStrs.SNegSoftLimitState	负软限位状态	Negative soft limit
CamStrs.SNextStep	下一步	Next
CamStrs.SNoBCS100	没有使用BCS100，无法启用清洁喷嘴功能	BCS100 is required in AutoCleanHead function but not found.
CamStrs.SNoExtendAxis	未检测到扩展轴[%d], 无法进行更换喷嘴	Axis [%d] not detected. Unable to replace nozzle
CamStrs.SNoFoundCleanPos	无法获取当前到位工作台的清洁位置!	Cannot access cleaning position for current table!
CamStrs.SNoUse	不使用	Not use
CamStrs.SNotMoveToLocation	没有运动到指定位置	Not in the target position

Loading…

niuzhenyu1

Automatically translated

Chinese (Simplified)

English 38 characters edited Current translation Translated

3 months ago

None

String added in the repository

Chinese (Simplified)

English 0 characters edited Empty

3 months ago

Browse all string changes

Things to check

Mismatched question mark

Source and translation do not both end with a question mark

Reset

Mismatched full stop

Source and translation do not both end with a full stop

Reset

Glossary

Chinese (Simplified)	English
机床	Machine	*HypCut软件术语库

String information

Context

CamStrs.SMoveToPosStartConfirm

Labels

Automatically translated

Flags

c-sharp-format, check-glossary, object-pascal-format, vue-format

String age

3 months ago

Last updated

2 weeks ago

Source string age

3 months ago

Translation file

en.po, string 187