CypWeld/C113 — English (United States) @ Weblate: 打开文件将会清空当前工位，是否继续打开

Translation

Context App_FrmCypWeld.SOpenFileHint

Chinese (Simplified)

English (United States)

Needs editing

Skip

Context	Chinese (Simplified)	English (United States)
App_FrmCypWeld.SDbgMsg	排故信息	Troubleshooting Info
App_FrmCypWeld.SGantryAllOrg	龙门全部回原点	Gantry All Return Origin
App_FrmCypWeld.SGantryInvalid	检测到龙门配置错误，请进入平台配置工具检查轴配置参数！	Gantry configuration error detected. Please go to CypConfig and check axis configuration parameters!
App_FrmCypWeld.SGantryPCRNotSuppot	暂不支持当前机型进行点云重建	Point Cloud Reconstruction Not Supported
App_FrmCypWeld.SGxOrg	G.X回原点	G.X Return Origin
App_FrmCypWeld.SGyOrg	G.Y回原点	G.Y Return Origin
App_FrmCypWeld.SGzOrg	G.Z回原点	G.Z Return Origin
App_FrmCypWeld.SGzOrgFirst	设置G.Z先回原点	Set G.Z Return Origin first
App_FrmCypWeld.SLineScanHandEyeSetFailed	线扫相机手眼设置失败，请尝试重启软件或重新标定	Line scan camera hand-eye setup failed, please try restarting the software or recalibrating.
App_FrmCypWeld.SMakeSureAllUpdate	确认要上传%s吗？	Are you sure you want to upload %s?
App_FrmCypWeld.SMakeSureMachineNotMove	请确认停止后没有点动过机床，否则可能会有危险！	Please confirm that the machine tool has not been jogged after stopping, as it may be dangerous!
App_FrmCypWeld.SMakeSureNotAdjustPosition	请确认停止后没有调整过焊枪姿态，否则可能会有危险！	Please confirm that the welding gun position has not been adjusted after stopping, as it may be dangerous!
App_FrmCypWeld.SMotorNumConflict	检测到轴号配置冲突，请进入平台配置工具检查轴配置、通用轴参数！	Axis number config error. Please go to CypConfig and check axis configuration and CommAxis parameters!
App_FrmCypWeld.SMotorNumZero	检测到有运动轴的轴号为0，请进入平台配置工具检查轴配置、通用轴参数！	A motion axis number is 0. Please go to CypConfig and check axis configuration and CommAxis parameters!
App_FrmCypWeld.SOpenFileForbidden	加工过程中禁止打开文件	Opening files is prohibited during processing
App_FrmCypWeld.SOpenFileHint	打开文件将会清空当前工位，是否继续打开	Opening the file will clear the current workspace. Do you want to continue opening it?
App_FrmCypWeld.SOpenTeachFrm	当前为示教图纸，请打开示教界面	This is a teaching drawing. Please open the teaching form.
App_FrmCypWeld.SOperationNotAllowed	系统正在运动中，不允许执行此操作！	The system is running. This operation is not allowed!
App_FrmCypWeld.SPosnCalibNotSupport	暂不支持当前工位变位机的标定	Calibration of the current positioner is not supported at this time
App_FrmCypWeld.SPosnInvalid	检测到变位机配置错误，请进入平台配置工具检查场景配置或者通用轴参数！	Positioner configuration error. Please go to CypConfig and check layout configuration and CommAxis parameters!
App_FrmCypWeld.SSpecifyBackupFilename	请指定备份文件名	Please specify the backup file name
App_FrmCypWeld.SWarningInfo	警告:	Warning:
App_FrmCypWeld.SWatingSaveFile	正在保存排故信息，请勿关闭软件	Saving troubleshooting information. Do not exit the software.
App_FrmCypWeld.SWeldDebugModeOff	设置[焊接试运行模式]关闭	Disable [Dry Run].
App_FrmCypWeld.SWeldDebugModeOn	设置[焊接试运行模式]打开	Enable [Dry Run].
App_FrmCypWeld.SWeldtrackDbgName	寻缝精度调试	Seam Tracker Precision Debug
App_FrmCypWeld.SWeldtrackDevName	寻缝器	BCVWeldTrack
App_FrmCypWeld.SWeldtrackNotSupport	当前寻缝器不支持该功能	The BCVWeldTrack does not support this function.
App_GlobalSetting.SCollisionInstantiationError	未实例化碰撞检测器	Collision detector is not instantiated
App_GlobalSetting.SDriveQuickStop	驱动器快速停止	Drive quick stop
App_GlobalSetting.SLowSpdErr	平动低速不能低于空移速度的100倍，请重新设置	Translation low speed cannot be lower than 100 times the high speed. Please reconfigure.

Context	Chinese (Simplified)	English (United States)
App_FrmCypWeld.SDbgMsg	排故信息	Troubleshooting Info
App_FrmCypWeld.SGantryAllOrg	龙门全部回原点	Gantry All Return Origin
App_FrmCypWeld.SGantryInvalid	检测到龙门配置错误，请进入平台配置工具检查轴配置参数！	Gantry configuration error detected. Please go to CypConfig and check axis configuration parameters!
App_FrmCypWeld.SGantryPCRNotSuppot	暂不支持当前机型进行点云重建	Point Cloud Reconstruction Not Supported
App_FrmCypWeld.SGxOrg	G.X回原点	G.X Return Origin
App_FrmCypWeld.SGyOrg	G.Y回原点	G.Y Return Origin
App_FrmCypWeld.SGzOrg	G.Z回原点	G.Z Return Origin
App_FrmCypWeld.SGzOrgFirst	设置G.Z先回原点	Set G.Z Return Origin first
App_FrmCypWeld.SLineScanHandEyeSetFailed	线扫相机手眼设置失败，请尝试重启软件或重新标定	Line scan camera hand-eye setup failed, please try restarting the software or recalibrating.
App_FrmCypWeld.SMakeSureAllUpdate	确认要上传%s吗？	Are you sure you want to upload %s?
App_FrmCypWeld.SMakeSureMachineNotMove	请确认停止后没有点动过机床，否则可能会有危险！	Please confirm that the machine tool has not been jogged after stopping, as it may be dangerous!
App_FrmCypWeld.SMakeSureNotAdjustPosition	请确认停止后没有调整过焊枪姿态，否则可能会有危险！	Please confirm that the welding gun position has not been adjusted after stopping, as it may be dangerous!
App_FrmCypWeld.SMotorNumConflict	检测到轴号配置冲突，请进入平台配置工具检查轴配置、通用轴参数！	Axis number config error. Please go to CypConfig and check axis configuration and CommAxis parameters!
App_FrmCypWeld.SMotorNumZero	检测到有运动轴的轴号为0，请进入平台配置工具检查轴配置、通用轴参数！	A motion axis number is 0. Please go to CypConfig and check axis configuration and CommAxis parameters!
App_FrmCypWeld.SOpenFileForbidden	加工过程中禁止打开文件	Opening files is prohibited during processing
App_FrmCypWeld.SOpenFileHint	打开文件将会清空当前工位，是否继续打开	Opening the file will clear the current workspace. Do you want to continue opening it?
App_FrmCypWeld.SOpenTeachFrm	当前为示教图纸，请打开示教界面	This is a teaching drawing. Please open the teaching form.
App_FrmCypWeld.SOperationNotAllowed	系统正在运动中，不允许执行此操作！	The system is running. This operation is not allowed!
App_FrmCypWeld.SPosnCalibNotSupport	暂不支持当前工位变位机的标定	Calibration of the current positioner is not supported at this time
App_FrmCypWeld.SPosnInvalid	检测到变位机配置错误，请进入平台配置工具检查场景配置或者通用轴参数！	Positioner configuration error. Please go to CypConfig and check layout configuration and CommAxis parameters!
App_FrmCypWeld.SSpecifyBackupFilename	请指定备份文件名	Please specify the backup file name
App_FrmCypWeld.SWarningInfo	警告:	Warning:
App_FrmCypWeld.SWatingSaveFile	正在保存排故信息，请勿关闭软件	Saving troubleshooting information. Do not exit the software.
App_FrmCypWeld.SWeldDebugModeOff	设置[焊接试运行模式]关闭	Disable [Dry Run].
App_FrmCypWeld.SWeldDebugModeOn	设置[焊接试运行模式]打开	Enable [Dry Run].
App_FrmCypWeld.SWeldtrackDbgName	寻缝精度调试	Seam Tracker Precision Debug
App_FrmCypWeld.SWeldtrackDevName	寻缝器	BCVWeldTrack
App_FrmCypWeld.SWeldtrackNotSupport	当前寻缝器不支持该功能	The BCVWeldTrack does not support this function.
App_GlobalSetting.SCollisionInstantiationError	未实例化碰撞检测器	Collision detector is not instantiated
App_GlobalSetting.SDriveQuickStop	驱动器快速停止	Drive quick stop

Loading…

huanglinxiao

Translation uploaded

Chinese (Simplified)

English (United States) 86 characters edited Current translation Translated

2 days ago

None

String added in the repository

Chinese (Simplified)

English (United States) 0 characters edited Empty

2 days ago

Browse all string changes

Things to check

Mismatched question mark

Source and translation do not both end with a question mark

Reset

Glossary

Chinese (Simplified)	English (United States)
No related strings found in the glossary.

String information

Context

App_FrmCypWeld.SOpenFileHint

Flags

c-sharp-format, object-pascal-format, vue-format

String age

2 days ago

Last updated

2 days ago

Source string age

2 months ago

Translation file

en_US.po, string 51