NcLayer.MultiTask/MVCFramework — English @ Weblate: 存在无效编码, 请选择有效编码后再保存

Translation

Context MultiTask.SInputBitSetError

Chinese (Simplified)

English

Needs editing

Skip

Context	Chinese (Simplified)	English
MultiTask.SHardPos	硬限位（正）	Hard limit (positive)
MultiTask.SHomeRefSetting	停靠点设置	Set Zero Ref
MultiTask.SIOFileMode	IO切换	IO Switch
MultiTask.SIOTaskFeedBackInport	准备就绪输入口	Input ready
MultiTask.SIOTaskFrm	IO任务加工	IO task
MultiTask.SIOTaskFrmDescHint	使用IO口控制工位自动执行加工	Use IO for station control and auto production
MultiTask.SIOTaskFrmTitle	参数设定	Settings
MultiTask.SIOTaskOutput	加工完毕输出口	Production complete output
MultiTask.SIOTaskWorkFinished	加工完成	Finished
MultiTask.SImportFile	添加任务	Add Task
MultiTask.SInMultFiles	多文件输入	Multi-file input
MultiTask.SIncludeTech	计算图形工艺	Include graphic technique
MultiTask.SInitPos	初始位置	Initial Pos
MultiTask.SInportCode	输入口二进制编码	Binary encoding of input ports
MultiTask.SInput	输入	Input
MultiTask.SInputBitSetError	存在无效编码, 请选择有效编码后再保存	There is invalid encoding. Please select a valid encoding, then save!
MultiTask.SInputCloseLogic	常闭	NC
MultiTask.SInputFileName	请输入文件名	Please enter the file name.
MultiTask.SInputOpenLogic	常开	NO
MultiTask.SInvalidReadyInputAlarmDesc	当前工位对应的就绪输入口信号无效，不能执行加工指令	The signal of the ready input port corresponding to the current station is invalid, and the machining instruction cannot be executed.
MultiTask.SLeft	左	Left
MultiTask.SLeftDown	左下	Bottom-Left
MultiTask.SLeftUp	左上	Top-Left
MultiTask.SListFileWorkMode	列表加工	List Production
MultiTask.SListModeHint	列表模式下需要搭配文件自动切换	The multi-file machining mode requires enabling the file Auto Switch.
MultiTask.SLoopPause	循环暂停	Paused
MultiTask.SLoopWorkSetting	循环拷机设置	Run Test Settings
MultiTask.SMaterial	材质	Material
MultiTask.SMid	中	Average
MultiTask.SModeChangeFailHint	单台单板模式下，不启用自动交换台只能使用单次加工	1 Station - 1 File mode will not use a pallet changer, so you can only use one-time production.
MultiTask.SMoveBottom	置底	Bottom

Context	Chinese (Simplified)	English
MultiTask.SHardPos	硬限位（正）	Hard limit (positive)
MultiTask.SHomeRefSetting	停靠点设置	Set Zero Ref
MultiTask.SIOFileMode	IO切换	IO Switch
MultiTask.SIOTaskFeedBackInport	准备就绪输入口	Input ready
MultiTask.SIOTaskFrm	IO任务加工	IO task
MultiTask.SIOTaskFrmDescHint	使用IO口控制工位自动执行加工	Use IO for station control and auto production
MultiTask.SIOTaskFrmTitle	参数设定	Settings
MultiTask.SIOTaskOutput	加工完毕输出口	Production complete output
MultiTask.SIOTaskWorkFinished	加工完成	Finished
MultiTask.SImportFile	添加任务	Add Task
MultiTask.SInMultFiles	多文件输入	Multi-file input
MultiTask.SIncludeTech	计算图形工艺	Include graphic technique
MultiTask.SInitPos	初始位置	Initial Pos
MultiTask.SInportCode	输入口二进制编码	Binary encoding of input ports
MultiTask.SInput	输入	Input
MultiTask.SInputBitSetError	存在无效编码, 请选择有效编码后再保存	There is invalid encoding. Please select a valid encoding, then save!
MultiTask.SInputCloseLogic	常闭	NC
MultiTask.SInputFileName	请输入文件名	Please enter the file name.
MultiTask.SInputOpenLogic	常开	NO
MultiTask.SInvalidReadyInputAlarmDesc	当前工位对应的就绪输入口信号无效，不能执行加工指令	The signal of the ready input port corresponding to the current station is invalid, and the machining instruction cannot be executed.
MultiTask.SLeft	左	Left
MultiTask.SLeftDown	左下	Bottom-Left
MultiTask.SLeftUp	左上	Top-Left
MultiTask.SListFileWorkMode	列表加工	List Production
MultiTask.SListModeHint	列表模式下需要搭配文件自动切换	The multi-file machining mode requires enabling the file Auto Switch.
MultiTask.SLoopPause	循环暂停	Paused
MultiTask.SLoopWorkSetting	循环拷机设置	Run Test Settings
MultiTask.SMaterial	材质	Material
MultiTask.SMid	中	Average
MultiTask.SModeChangeFailHint	单台单板模式下，不启用自动交换台只能使用单次加工	1 Station - 1 File mode will not use a pallet changer, so you can only use one-time production.

Loading…

mt:weblate-translation-memory

Automatically translated

Chinese (Simplified)

English 0 characters edited Current translation Translated

2 months ago

wangyuan

Translation uploaded

Chinese (Simplified)

English 69 characters edited Current translation Needs editing

2 months ago

None

String added in the repository

Chinese (Simplified)

English 0 characters edited Empty

4 months ago

Browse all string changes

Things to check

Mismatched exclamation mark

Source and translation do not both end with an exclamation mark

Reset

Glossary

Chinese (Simplified)	English
保存	Save	*HypCut软件术语库
无	Null	*HypCut Revo软件术语库
选择	Select	*HypCut软件术语库
保存	Save	FACut软件术语表
保存	saved	FACut软件术语表

String information

Context

MultiTask.SInputBitSetError

Flags

c-sharp-format, object-pascal-format, vue-format

String age

4 months ago

Last updated

2 months ago

Source string age

4 months ago

Translation file

en.po, string 68