激光业务前端/cutui — English @ Weblate: 当前焦点：

Translation

Key focusDebug.currentFocusValue

Chinese (Simplified)

English

Needs editing

Skip

Key	Chinese (Simplified)	English
focusDebug.title	切塞尺	Focus AutoTest
focusDebug.stepDesc1	步骤1: 生成测试图纸	Step1: Generate test file
focusDebug.stepDesc2	步骤2: 设置独立工艺	Step2: Set techniques
focusDebug.stepDesc3	步骤3: 切割图形测焦	Step3: Focus measurement
focusDebug.stepDesc4	步骤4: 校准数据写入	Step4: Write data
focusDebug.dlgGroupTitle1	焦点参数	Focus param
focusDebug.dlgGroupTitle2	加工线参数	Cut line param
focusDebug.generateFile	生成图纸	Generate File
focusDebug.layerEdit	工艺修正	Technique
focusDebug.focusAdjust	焦点校准	Adjust Focus
focusDebug.startFocusDebug	执行	Execute
focusDebug.focusTip1	切割前焦点回原点	Focus return origin before cutting
focusDebug.focusTip2	建议采用1mm左右薄板	1mm plate recommended
focusDebug.focusTip3	切割跟随高度固定为	Set fixed height to follow as
focusDebug.focusTip4	采用零焦点补偿量切割	Use zero focus offset in cutting
focusDebug.currentFocusValue	当前焦点：	Current Point
focusDebug.focusOffset	焦点补偿值：	Focus offset:
focusDebug.beamSize	光斑直径：	Beam dia:
focusDebug.focusMin	焦点范围：	Focus range:
focusDebug.focusGap	焦点间距：	Focus interval:
focusDebug.lineLength	线段长度：	Length:
focusDebug.lineGap	线段间距：	Distance:
focusDebug.borderWidth	外框宽度：	Frame width:
focusDebug.confirmInfo	生成图纸将会替换当前图纸，是否继续?	New drawing will overwrite it. Continue?
messageConfirm.warning	警告提示	Warning
messageConfirm.error	错误提示	Error Message
messageConfirm.info	信息提示	Information Tips
messageConfirm.tip	提示	Hint
messageConfirm.machining.sort	新增图形、设置图层可能引起加工次序变化，您是否需要先排序？	New graphics and layers may change cutting order. If sorting the toolpath first?
passwordDlg.title	请输入密码	Enter password
passwordDlg.tip	您正在进行的操作受密码保护！	The operation is password protected!

Key	Chinese (Simplified)	English
focusDaAdjust.autofill	DA等差填写	DA Auto Complete
focusDaAdjust.da.execute	执行DA输出	Execute DA Output
focusDaAdjust.da.output	DA输出	DA Output
focusDaAdjust.enable	启用焦点校正	Focus Calibration
focusDaAdjust.focus	实际焦点	Actual Focus
focusDaAdjust.mono.tip	数据非单调递减或递增，请重新检查数据	The focal position is not monotonically descending or ascending. Check the data!
focusDaAdjust.output	输出	Output
focusDaAdjust.returnorg	焦点回原点	Focus Return Origin
focusDaAdjust.save	保存校正参数	Save calibration param
focusDaAdjust.tip	依次点击输出，然后将焦点控制模块返回的焦点坐标填入右边。	Click output in sequence, and then fill in the focus coordinates returned by the focus control module on the right.
focusDaAdjust.title	焦点校正	DA Adjustment of Focus Control
focusDaAdjust.unit.group	组	Group
focusDebug.beamSize	光斑直径：	Beam dia:
focusDebug.borderWidth	外框宽度：	Frame width:
focusDebug.confirmInfo	生成图纸将会替换当前图纸，是否继续?	New drawing will overwrite it. Continue?
focusDebug.currentFocusValue	当前焦点：	Current Point
focusDebug.dlgGroupTitle1	焦点参数	Focus param
focusDebug.dlgGroupTitle2	加工线参数	Cut line param
focusDebug.focusAdjust	焦点校准	Adjust Focus
focusDebug.focusGap	焦点间距：	Focus interval:
focusDebug.focusMin	焦点范围：	Focus range:
focusDebug.focusOffset	焦点补偿值：	Focus offset:
focusDebug.focusTip1	切割前焦点回原点	Focus return origin before cutting
focusDebug.focusTip2	建议采用1mm左右薄板	1mm plate recommended
focusDebug.focusTip3	切割跟随高度固定为	Set fixed height to follow as
focusDebug.focusTip4	采用零焦点补偿量切割	Use zero focus offset in cutting
focusDebug.generateFile	生成图纸	Generate File
focusDebug.layerEdit	工艺修正	Technique
focusDebug.lineGap	线段间距：	Distance:
focusDebug.lineLength	线段长度：	Length:

Loading…

None

String added in the repository

Chinese (Simplified)

English 13 characters edited Current translation Translated

9 months ago

Browse all string changes

Things to check

Does not follow glossary

Following terms are not translated according to glossary: 当前焦点, 焦点

Reset

Mismatched colon

Source and translation do not both end with a colon

Reset

Glossary

Chinese (Simplified)	English
当前焦点	Current focus	*HypCut软件术语库
焦点	Focus	*HypCut软件术语库
焦点	Focus	*HypCut Revo软件术语库

String information

Key

focusDebug.currentFocusValue

Flags

check-glossary, fluent-target-inner-html, javascript-format, object-pascal-format, percent-placeholders, vue-format

String age

9 months ago

Last updated

a month ago

Source string age

9 months ago

Translation file

public/languages/en.json, string 224