PlateConfig/PlateConfig/trunk-Maintenance — English @ Weblate: 选择串口:

Translation

Context Config.SChooseNitrogenComm

Chinese (Simplified)

English

Needs editing

Skip

Context	Chinese (Simplified)	English
Config.SCheckLaserHeadConnection	检查切割头各连接件是否有松动	Check if laser head parts are connected
Config.SCheckLens	检查聚焦镜、准直镜片、透镜是否正常	Check focusing lens, collimating lens, and optical lens condition
Config.SCheckLimitSwitch	检查机床各接近开关是否有效，表面是否存在异物	Check if switches work or covered with dust
Config.SCheckNetStatus	检查网络	Check Network
Config.SCheckNetWork	测试网络连接	Test Network
Config.SCheckOperPanel	检查操作面板、急停按钮	Check operation panel and emergency button
Config.SCheckRack	检查支撑齿条是否需要更换	Check if supporting rack should be replaced
Config.SCheckRange	强制启用软限位	Force enable soft limit
Config.SCheckWaterway	检查水路，油路是否有泄漏	Check if any leakage in water and oil circuit
Config.SCheckcoaxiality	检查喷嘴与激光同轴度（同心）	Check if nozzle and laser beam are concentric
Config.SChiller	水冷机	Water Chiller
Config.SChillerParams	水冷机参数	Waterchiller parameters
Config.SChillerPort	端口号	Port
Config.SChillerTitle	水冷机	Water Chiller
Config.SChillerType	水冷机选择	Select Waterchiller
Config.SChooseNitrogenComm	选择串口:	Serial Port
Config.SChooseNitrogenProtocol	选择协议:	Select Protocol:
Config.SClampBtn	夹紧按钮	Clamp button
Config.SClampCtrl	夹紧气缸控制	Clamp cylinder
Config.SClampDelay	等待抱闸超时检测	Wait for Brake
Config.SClampInput	夹紧解除输入	Unclamp input
Config.SClapIn	夹紧解除信号	Unclamp signal
Config.SClapInSub1	夹紧解除信号	Unclamp signal
Config.SClapInSub2	夹紧解除信号	Unclamp signal
Config.SClapInSub3	夹紧解除信号	Unclamp signal
Config.SClapOut	抱闸夹紧	Brake Clamp
Config.SCleanHeadData	清洁喷嘴数据	Clean nozzle data
Config.SCleanUseStation	在工装内清洁喷嘴	Clean nozzle in Fixture
Config.SCleanerPort	报警铃声	Alarm bell
Config.SClear	清除	Clear
Config.SClearAlarms	清空报警	Clear alarm

Context	Chinese (Simplified)	English
Config.SCheckLaserHeadConnection	检查切割头各连接件是否有松动	Check if laser head parts are connected
Config.SCheckLens	检查聚焦镜、准直镜片、透镜是否正常	Check focusing lens, collimating lens, and optical lens condition
Config.SCheckLimitSwitch	检查机床各接近开关是否有效，表面是否存在异物	Check if switches work or covered with dust
Config.SCheckNetStatus	检查网络	Check Network
Config.SCheckNetWork	测试网络连接	Test Network
Config.SCheckOperPanel	检查操作面板、急停按钮	Check operation panel and emergency button
Config.SCheckRack	检查支撑齿条是否需要更换	Check if supporting rack should be replaced
Config.SCheckRange	强制启用软限位	Force enable soft limit
Config.SCheckWaterway	检查水路，油路是否有泄漏	Check if any leakage in water and oil circuit
Config.SCheckcoaxiality	检查喷嘴与激光同轴度（同心）	Check if nozzle and laser beam are concentric
Config.SChiller	水冷机	Water Chiller
Config.SChillerParams	水冷机参数	Waterchiller parameters
Config.SChillerPort	端口号	Port
Config.SChillerTitle	水冷机	Water Chiller
Config.SChillerType	水冷机选择	Select Waterchiller
Config.SChooseNitrogenComm	选择串口:	Serial Port
Config.SChooseNitrogenProtocol	选择协议:	Select Protocol:
Config.SClampBtn	夹紧按钮	Clamp button
Config.SClampCtrl	夹紧气缸控制	Clamp cylinder
Config.SClampDelay	等待抱闸超时检测	Wait for Brake
Config.SClampInput	夹紧解除输入	Unclamp input
Config.SClapIn	夹紧解除信号	Unclamp signal
Config.SClapInSub1	夹紧解除信号	Unclamp signal
Config.SClapInSub2	夹紧解除信号	Unclamp signal
Config.SClapInSub3	夹紧解除信号	Unclamp signal
Config.SClapOut	抱闸夹紧	Brake Clamp
Config.SCleanHeadData	清洁喷嘴数据	Clean nozzle data
Config.SCleanUseStation	在工装内清洁喷嘴	Clean nozzle in Fixture
Config.SCleanerPort	报警铃声	Alarm bell
Config.SClear	清除	Clear

Loading…

niuzhenyu1

Automatically translated

Chinese (Simplified)

English 11 characters edited Current translation Translated

3 months ago

None

String added in the repository

Chinese (Simplified)

English 0 characters edited Empty

3 months ago

Browse all string changes

Things to check

Does not follow glossary Enforced

Following terms are not translated according to glossary: 选择

Mismatched colon

Source and translation do not both end with a colon

Reset

Glossary

Chinese (Simplified)	English
选择	Select	*HypCut软件术语库

String information

Context

Config.SChooseNitrogenComm

Labels

Automatically translated

Flags

c-sharp-format, check-glossary, object-pascal-format, vue-format

String age

3 months ago

Last updated

a month ago

Source string age

3 months ago

Translation file

en.po, string 224