Zen

Translation

CfgTool_Alarms.SGasAlarm
Chinese (Simplified)
气压报警
10/100 · 4

Sign in to save the translation.

Context Chinese (Simplified) English Actions
App_Strs.SLineScanHandEyeSetFailed
线扫相机手眼设置失败，请尝试重启软件或重新标定
Line scan camera hand-eye setup failed, please try restarting the software or recalibrating.
App_Strs.SMotorNumConflict
检测到轴号配置冲突，请进入平台配置工具检查轴配置、通用轴参数！
Axis number config error. Please go to CypConfig and check axis configuration and CommAxis parameters!
App_Strs.SMotorNumZero
检测到有运动轴的轴号为0，请进入平台配置工具检查轴配置、通用轴参数！
A motion axis number is 0. Please go to CypConfig and check axis configuration and CommAxis parameters!
App_Strs.SOpenFileForbidden
加工过程中禁止打开文件
Opening files is prohibited during processing
App_Strs.SOperationNotAllowed
系统正在运动中，不允许执行此操作！
The system is running. This operation is not allowed!
App_Strs.SPosnInvalid
检测到变位机配置错误，请进入平台配置工具检查场景配置或者通用轴参数！
Positioner configuration error. Please go to CypConfig and check layout configuration and CommAxis parameters!
App_Strs.SSpecifyBackupFilename
请指定备份文件名
Please specify the backup file name
App_Strs.SWarningInfo
警告:
Warning:
CfgTool_Alarms.SAlarm
报警
Alarm
CfgTool_Alarms.SCollision
碰撞检测输入
Collision Detection Input
CfgTool_Alarms.SDiagnose
检修开关
Maintenance Switch
CfgTool_Alarms.SEmStop
急停
Em-Stop
CfgTool_Alarms.SFenceA
工位A围栏
Bench A Fixture
CfgTool_Alarms.SFenceB
工位B围栏
Bench B Fixture
CfgTool_Alarms.SFenceGlobal
全局围栏
Global Fixture
CfgTool_Alarms.SGasAlarm
气压报警
Gas alarm:
CfgTool_Alarms.SWarning
警告
Warning
CfgTool_Baseframe.SAction
动作
Action
CfgTool_Baseframe.SActualcoordinates
实际坐标：%.4f, 正向名义：%.4f, 反向名义: %.4f
Actual Coordinate:%.4f, Forward Nominal:%.4f, Reverse Nominal: %.4f
CfgTool_Baseframe.SAddDownTeachPoint
最后位置插入示教点
Insert teaching point at the last position
CfgTool_Baseframe.SAddFirstPoint
添加第一个特征点
Add First Feature Point
CfgTool_Baseframe.SAddFirstVisionPoint
添加第一个视觉特征点
Add First Vision Feature Point
CfgTool_Baseframe.SAddSecondPoint
添加第二个特征点
Add Second Feature Point
CfgTool_Baseframe.SAddSecondVisionPoint
添加第二个视觉特征点
Add Second Vision Feature Point
CfgTool_Baseframe.SAddThirdPoint
添加第三个特征点
Add Third Feature Point
CfgTool_Baseframe.SAddThirdVisionPoint
添加第三个视觉特征点
Add Third Vision Feature Point
CfgTool_Baseframe.SAddUpTeachPoint
最前位置插入示教点
Insert teaching point at the front position
CfgTool_Baseframe.SAlarmAfterPulseImmedia
或者偏差达到 %f 个脉冲立即报警
Or alarm immediately if the error reaches %f pulses
CfgTool_Baseframe.SAlarmAfterPulseTime
偏差达到 %f 个脉冲且持续时间%d毫秒后报警
Alarm after %f pulses error for %d ms
CfgTool_Baseframe.SAlarmInfo
报警信息
Alarm info
CfgTool_Baseframe.SAlarmLight
报警灯光
Alarm lights
Context Chinese (Simplified) English Actions
App_Strs.SLineScanHandEyeSetFailed
线扫相机手眼设置失败，请尝试重启软件或重新标定
Line scan camera hand-eye setup failed, please try restarting the software or recalibrating.
App_Strs.SMotorNumConflict
检测到轴号配置冲突，请进入平台配置工具检查轴配置、通用轴参数！
Axis number config error. Please go to CypConfig and check axis configuration and CommAxis parameters!
App_Strs.SMotorNumZero
检测到有运动轴的轴号为0，请进入平台配置工具检查轴配置、通用轴参数！
A motion axis number is 0. Please go to CypConfig and check axis configuration and CommAxis parameters!
App_Strs.SOpenFileForbidden
加工过程中禁止打开文件
Opening files is prohibited during processing
App_Strs.SOperationNotAllowed
系统正在运动中，不允许执行此操作！
The system is running. This operation is not allowed!
App_Strs.SPosnInvalid
检测到变位机配置错误，请进入平台配置工具检查场景配置或者通用轴参数！
Positioner configuration error. Please go to CypConfig and check layout configuration and CommAxis parameters!
App_Strs.SSpecifyBackupFilename
请指定备份文件名
Please specify the backup file name
App_Strs.SWarningInfo
警告:
Warning:
CfgTool_Alarms.SAlarm
报警
Alarm
CfgTool_Alarms.SCollision
碰撞检测输入
Collision Detection Input
CfgTool_Alarms.SDiagnose
检修开关
Maintenance Switch
CfgTool_Alarms.SEmStop
急停
Em-Stop
CfgTool_Alarms.SFenceA
工位A围栏
Bench A Fixture
CfgTool_Alarms.SFenceB
工位B围栏
Bench B Fixture
CfgTool_Alarms.SFenceGlobal
全局围栏
Global Fixture
CfgTool_Alarms.SGasAlarm
气压报警
Gas alarm:
CfgTool_Alarms.SWarning
警告
Warning
CfgTool_Baseframe.SAction
动作
Action
CfgTool_Baseframe.SActualcoordinates
实际坐标：%.4f, 正向名义：%.4f, 反向名义: %.4f
Actual Coordinate:%.4f, Forward Nominal:%.4f, Reverse Nominal: %.4f
CfgTool_Baseframe.SAddDownTeachPoint
最后位置插入示教点
Insert teaching point at the last position
CfgTool_Baseframe.SAddFirstPoint
添加第一个特征点
Add First Feature Point
CfgTool_Baseframe.SAddFirstVisionPoint
添加第一个视觉特征点
Add First Vision Feature Point
CfgTool_Baseframe.SAddSecondPoint
添加第二个特征点
Add Second Feature Point
CfgTool_Baseframe.SAddSecondVisionPoint
添加第二个视觉特征点
Add Second Vision Feature Point
CfgTool_Baseframe.SAddThirdPoint
添加第三个特征点
Add Third Feature Point
CfgTool_Baseframe.SAddThirdVisionPoint
添加第三个视觉特征点
Add Third Vision Feature Point
CfgTool_Baseframe.SAddUpTeachPoint
最前位置插入示教点
Insert teaching point at the front position
CfgTool_Baseframe.SAlarmAfterPulseImmedia
或者偏差达到 %f 个脉冲立即报警
Or alarm immediately if the error reaches %f pulses
CfgTool_Baseframe.SAlarmAfterPulseTime
偏差达到 %f 个脉冲且持续时间%d毫秒后报警
Alarm after %f pulses error for %d ms
CfgTool_Baseframe.SAlarmInfo
报警信息
Alarm info

Loading…

huanglinxiao

Translation uploaded
气压报警
Gas alarm:
12 days ago
huanglinxiao

Translation uploaded
气压报警
Gas alarm:
12 days ago
None

String added in the repository
气压报警
 
2 months ago
Browse all string changes

Things to check

Mismatched colon

Source and translation do not both end with a colon

Reset

Glossary

Chinese (Simplified) English
No related strings found in the glossary.

String information

Context
CfgTool_Alarms.SGasAlarm
Flags
c-sharp-format, object-pascal-format, vue-format
String age
2 months ago
Last updated
12 days ago
Source string age
2 months ago
Translation file
en.po, string 224