PlateHMI2D/PlateHMI2D/trunk-Maintenance — English @ Weblate: 自动识别板材尺寸过短, 图形尺寸必须大于50mm*50mm！

Translation

Context Application.SAutoRecLenTooShortReason

Chinese (Simplified)

English

Needs editing

Skip

Context	Chinese (Simplified)	English
Application.SAutoCleanErrorRedo2	自动清洁喷嘴未完成,下次加工重新执行	Auto Clean Nozzle is not done. Do it next time.
Application.SAutoCleanErrorState	设定的状态与当前系统状态不符，无法执行清洁喷嘴	The system state does not match the its settings. Cannot clean the nozzle.
Application.SAutoCleanHead	自动清洁喷嘴	Clean Head
Application.SAutoCleanNozzleActive	自动清洁喷嘴	Clean Head
Application.SAutoFindCenter1	一键工件寻中	Quick Centering
Application.SAutoGenerate	工位阵列一键设置	Quick Set Station Array
Application.SAutoNozzle	自动喷嘴	Auto Nozzle
Application.SAutoNozzleConfirm	运动前弹窗确认	Pop-up confirmation before start
Application.SAutoNozzleTest	喷嘴拷机	Nozzle Cycle Test
Application.SAutoNozzleTestNew	喷嘴拷机测试	Nozzle Cycle Test
Application.SAutoPause	自动暂停	Auto Pause
Application.SAutoPauseTimerWaitingForPause	等待暂停	Waiting
Application.SAutoPauseTimerWaitingForResume	等待继续	Waiting
Application.SAutoPick	自动下料（所有）	Auto Unload(all)
Application.SAutoPlate	自动识别板材尺寸	Auto identify plate size
Application.SAutoRecLenTooShortReason	自动识别板材尺寸过短, 图形尺寸必须大于50mm*50mm！	Plate size is too small! It should be >= 50mm*50mm!
Application.SAutoSSwitchTable	自动切换工作台	Pallet Auto Change
Application.SAutoSave	(自动保存)	(Auto Save)
Application.SAutoSaveCpsInitFail	自动保存断点初始化失败！	Failed to save break point initialization
Application.SAutoSaveHint	这是由系统恢复的自动保存的文件，并非您的原始文件	This file is automatically saved by the system. It is not your original file.
Application.SAutoSaveTaskExist	断点任务已自动备份	Auto backup task
Application.SAutoSaveTaskSucess	自动备份断点任务成功！文件位置：%s	Auto backup task OK! File location:%s
Application.SAutoSavedFile	(自动保存)	(AutoSave)
Application.SAutoTechNotice	匹配到工艺[%s]，是否启用？	Process[%s] matched. Use it?
Application.SAutomaticProcess	单机自动流程	Standalone Automation
Application.SAutomationExtension	自动化扩展	Automation Extension
Application.SAvDaysErr	注册时间不得超过400天	Validity period should not exceed 400 days
Application.SAverage	中	Center
Application.SAxis	轴	Axis
Application.SAxisAllowMove	允许轴运动	Allow axis move
Application.SAxisLittleY	小Y轴	Sub-Y Axis

Context	Chinese (Simplified)	English
Application.SAutoCleanErrorRedo2	自动清洁喷嘴未完成,下次加工重新执行	Auto Clean Nozzle is not done. Do it next time.
Application.SAutoCleanErrorState	设定的状态与当前系统状态不符，无法执行清洁喷嘴	The system state does not match the its settings. Cannot clean the nozzle.
Application.SAutoCleanHead	自动清洁喷嘴	Clean Head
Application.SAutoCleanNozzleActive	自动清洁喷嘴	Clean Head
Application.SAutoFindCenter1	一键工件寻中	Quick Centering
Application.SAutoGenerate	工位阵列一键设置	Quick Set Station Array
Application.SAutoNozzle	自动喷嘴	Auto Nozzle
Application.SAutoNozzleConfirm	运动前弹窗确认	Pop-up confirmation before start
Application.SAutoNozzleTest	喷嘴拷机	Nozzle Cycle Test
Application.SAutoNozzleTestNew	喷嘴拷机测试	Nozzle Cycle Test
Application.SAutoPause	自动暂停	Auto Pause
Application.SAutoPauseTimerWaitingForPause	等待暂停	Waiting
Application.SAutoPauseTimerWaitingForResume	等待继续	Waiting
Application.SAutoPick	自动下料（所有）	Auto Unload(all)
Application.SAutoPlate	自动识别板材尺寸	Auto identify plate size
Application.SAutoRecLenTooShortReason	自动识别板材尺寸过短, 图形尺寸必须大于50mm*50mm！	Plate size is too small! It should be >= 50mm*50mm!
Application.SAutoSSwitchTable	自动切换工作台	Pallet Auto Change
Application.SAutoSave	(自动保存)	(Auto Save)
Application.SAutoSaveCpsInitFail	自动保存断点初始化失败！	Failed to save break point initialization
Application.SAutoSaveHint	这是由系统恢复的自动保存的文件，并非您的原始文件	This file is automatically saved by the system. It is not your original file.
Application.SAutoSaveTaskExist	断点任务已自动备份	Auto backup task
Application.SAutoSaveTaskSucess	自动备份断点任务成功！文件位置：%s	Auto backup task OK! File location:%s
Application.SAutoSavedFile	(自动保存)	(AutoSave)
Application.SAutoTechNotice	匹配到工艺[%s]，是否启用？	Process[%s] matched. Use it?
Application.SAutomaticProcess	单机自动流程	Standalone Automation
Application.SAutomationExtension	自动化扩展	Automation Extension
Application.SAvDaysErr	注册时间不得超过400天	Validity period should not exceed 400 days
Application.SAverage	中	Center
Application.SAxis	轴	Axis
Application.SAxisAllowMove	允许轴运动	Allow axis move

Loading…

niuzhenyu1

Automatically translated

Chinese (Simplified)

English 51 characters edited Current translation Translated

3 months ago

None

String added in the repository

Chinese (Simplified)

English 0 characters edited Empty

3 months ago

Browse all string changes

Things to check

Consecutive duplicated words

Text contains the same word twice in a row: 50mm

Reset

Glossary

Chinese (Simplified)	English
大	Large	*HypCut Revo软件术语库
尺寸	Size	*HypCut软件术语库
尺寸	Size	*HypCut Revo软件术语库
板材尺寸	Plate size	*HypCut Revo软件术语库
自动识别板材尺寸	Auto identify plate size	*HypCut Revo软件术语库
尺寸	Scale	CypCut软件术语表

String information

Context

Application.SAutoRecLenTooShortReason

Labels

Automatically translated

Flags

c-sharp-format, object-pascal-format, vue-format

String age

3 months ago

Last updated

10 days ago

Source string age

3 months ago

Translation file

en.po, string 146